How do you make a piezo pickup sound good?

12
Joan Corwin asked a question: How do you make a piezo pickup sound good?
Asked By: Joan Corwin
Date created: Sat, May 29, 2021 3:52 AM
Date updated: Sat, May 21, 2022 12:16 AM

Content

Top best answers to the question «How do you make a piezo pickup sound good»

The way to get a more natural sound is to record the guitar with a mic. You can still make use of the piezo by blending a little bit of its signal behind the mic'd tone to add a bit of definition, but the piezo alone will never sound as natural as a mic'd up guitar.

Try a Fishman or other preamp/DI with a graphic EQ on board. Then you can warm it up by boosting low and mid frequencies some and reduce the offendingly spiky highs. Too much boost will induce feedback, of course. A plain MXR or similar 10 band graphic EQ pedal might work just as well.

FAQ

Those who are looking for an answer to the question «How do you make a piezo pickup sound good?» often ask the following questions:

🏁 How to make a piezo guitar pickup?

Piezo pickups can be broken if you bend them. Although it may seem odd, your pickup will produce a much better sound if you mount it hanging off of the guitar, 50-50. In other words, half of the element (brass side) is taped to the bridge (or a brace), and the other half is hanging out in mid-air… For an experiment on making electric guitar ...

🏁 What does a piezo pickup on a guitar sound like?

  • The output of an acoustic piezo pickup doesn’t sound like what you’d hear when listening to a guitar in a room, but at the same time it doesn’t sound like a miked guitar either. In some ways, an acoustic guitar piezo pickup is too accurate because it doesn’t discriminate in what it picks up.

🏁 Are piezo pickups good?

Piezo disks in general are not a good way to amplify a DB. Thicker crystals like in Underwood and Shadow bridge wing Pickups have a higher output Level and are more feedback resistant. Bridge foot pickups are softer and sound nice with the bow. A good compromise are Full Circle, Yamahiko and maybe Lifeline.

10 other answers

The acoustic guitar piezo pickup not only misses the bump’s peak, but the frequency response extends much lower, giving a “boomy” sound. Also, the piezo pickup’s high frequencies are more pronounced because piezo pickups tend to have a natural brightness.

Unlike a microphone, with a pickup you will not record extraneous sounds from elsewhere in the room, just the sound of the acoustic instrument in which the pickup is mounted. In this project, you'll learn how to make a piezoelectric pickup for an acoustic guitar, using inexpensive components that you can find at your local Radio Shack store.

Piezo processors come in two primary flavors. The L.R. Baggs Para Acoustic DI is a good example of the first one, straight up tone shaping. The unit is basically a combination of a preamplifier stage like you'd find on a combo amp, running through a DI transformer to produce the balanced lo-Z output.

I don't have any pictures, but I've had good results from dipping the piezos in liquid electrical tape a few times to build up thickness. It's a good protective layer with no heating involved, and should be available in the electrical section of your local hardware store.

The answer for amplifying the sound of your acoustic guitar (and your electric guitar too) is the piezo pickup. The piezo pickup is built into the bridge of your guitar, and is a great way to add volume to your acoustic guitar. It’s also a great way to create a more acoustic-type sound to your electric guitar.

With piezo-ceramic pickups, you will need to use the high-impedance (high-ohmic) input in your amplifier. The ideal level is about 1 Mega Ohm, if the value is less, this will result in less volume and a certain loss of high frequencies/brilliance. You can easily achieve the proper resistance using our preamps.

If you’re on the UAD platform, a plug-in I can personally vouch for is Sound Machine Wood Works, which takes the distinctly tinny sound of a piezo pickup and turns it into a full acoustic sound.

Piezo pickups are often brighter and less warm than magnetic pickups, allowing for a high degree of string articulation and clarity in your tone. While they may not automatically turn your electric into an acoustic guitar tone-wise, they indeed represent the actual acoustic energy from your electric guitar.

In general, piezo systems will never sound as good as an excellent acoustic in the studio mic'd with a nice external condenser and mic pre. Your live acoustic tone is almost always going to be some sort of compromise. I hope this helps.

Record while monitoring the pickup, that way you can "react" to it. Things that sound good in real life may not sound so good through the p'up. Some USTs give out over-large transients when the pick/nail hits the string (look at the waveform), you may be able to tame these with a carefully set compressor/limiter.

Your Answer

We've handpicked 21 related questions for you, similar to «How do you make a piezo pickup sound good?» so you can surely find the answer!

How to make piezo pickups?

Can you use piezo pickups on a guitar?

  • If the two groups of wires touch you wont get any sound (If you want to check to make sure wires are not touching plug the guitar cable into an amp and tap the piezo if all is good you will hear a thump from the amp). Tape the piezos to the guitar's top. Now you can have a little fun experimenting with the piezos positions.
Can good pickups make any guitar sound good?

This way, you can upgrade the sound of your guitar and create something unique and beautiful without buying a new instrument. If you are satisfied with the wood, design, and the look of your guitar, upgrading pickups is something you can always try. So the answer is yes. Pickups can make all the difference in the world.

How do you install a piezo pickup?

The best place to mount the piezo element is on the back side of the bridge. (the side towards the endpin) To apply the pickup, take a piece of double-stick tape, just enough to cover half of the element, and place it on the element.

Will a piezo pickup work with nylon strings?

While standard undersaddle piezo pickups should work fine with nylon string guitars, having one that's specifically designed for your instrument is much better.

Do you need a preamp with a piezo pickup?
  • Since acoustic instruments don’t already function with electricity, a preamp with the piezo pickup is going to be necessary. The preamp for an acoustic instrument will take the quiet sound made by the strings and give it an additional boots.
What does the battery do on a piezo pickup?
  • "The battery powers the preamp for the piezo pickup when not being powered by the 13 pin cable.". "The piezo will work without the battery, it just works better with more output and dynamic range with the battery.".
What is a piezo pickup on an acoustic guitar?
  • The piezo pickup is built into the bridge of your guitar, and is a great way to add volume to your acoustic guitar. It’s also a great way to create a more acoustic-type sound to your electric guitar. Active and passive pickups are a great way to amplify the sound of your guitar.
Where does a piezo pickup go on a guitar?
  • The piezo pickup is built into the bridge of your guitar, and is a great way to add volume to your acoustic guitar. It’s also a great way to create a more acoustic-type sound to your electric guitar. Active and passive pickups are a great way to amplify the sound of your guitar.
Where to mount a piezo pickup on a bridge?
  • Half of the element (brass side) is tapped to the bridge, and the other half is hanging in mid-air. The best place to mount the piezo element is on the back side of the bridge. To apply the pickup take a piece of double-stick tape, just enough to cover half of the element, and place it on the element.
What kind of sound does a bridge pickup make?
  • Bridge pickups produce a sharp, bright, crisp sound because they have a lot of high-end frequencies. You’ll also notice your notes boast great definition so you can clearly tell one apart from the other as you play. This is due to how the bridge pickup works.
Can a piezo pickup be used on an electric guitar?
  • The answer for amplifying the sound of your acoustic guitar (and your electric guitar too) is the piezo pickup. The piezo pickup is built into the bridge of your guitar, and is a great way to add volume to your acoustic guitar. It’s also a great way to create a more acoustic-type sound to your electric guitar.
Can you cut the crystals out of a piezo pickup?
  • Crushing or cracking the crystals in your piezo pickup will impact the quality of sound and basic function of the pickup. Using very sharp scissors or wire cutters will allow you to cut the pickup’s crystals without crushing them or damaging them.
Can you run a piezo transducer pickup through a preamp?

I don't know that RMC piezo hardware, but "powered by a 9V battery" is a hint that there is a preamp. The piezo itself is an electromechanical part and wouldn't need any battery. Many guitars with piezos have built-in preamps to get equal levels from piezo and magnetic pickups. The pure piezo output wouldn't provide that.

Can you use a tone pot for a piezo pickup?

You may not care for the 500k pot for the pickup, so adding a resistor for the pickup to see 250k would work. You need a volume pot, blend pot and tone pot or use a concentric pot/pots to work it out. Round Piezo's have been used for a long time with passive electronics.

How does a piezo pickup work on a b band?
  • Piezo pickups tend to impart a sound of their own, often described as "quacky" or "plastic", B-Band transducers act in much the same way a condenser microphone does. This results in excellent reproduction of your acoustic instrument's unique voice. "Hear the Truth".
How can i make my single coil pickup sound better?
  1. Adjust your amp and guitar's EQ for a warm and thick tone.
  2. Double up your distortion and overdrive pedals.
  3. Use guitar effects (delay, chorus, octave, compression) to thicken the sound.
  4. Increase your guitars natural sustain.
  5. Use a pickup simulator pedal.
Can ceramic pickups sound good?

Well-designed ceramic pickups can sound great. Poorly-designed ceramic pickups can sound bad. My experience with the cheapo ceramics that come from the factory on entry-level guitars is that they sound good and punchy at very low bedroom volume, but they fall apart terribly when you turn the amp up.

Can cheap pickups sound good?

Since pickups are the very thing that creates the tone of the guitar, investing in good ones will let you have a perfect and clear tone. On the other hand, cheap pickups are lower quality and the tone will never be nearly as good.

Are piezo pickups passive?

The piezo pickup is built into the bridge of your guitar, and is a great way to add volume to your acoustic guitar. It’s also a great way to create a more acoustic-type sound to your electric guitar. Active and passive pickups are a great way to amplify the sound of your guitar.

Can a sound hole pickup sound like an electric guitar?
  • Sound hole pickups can sound a little bit like an electric guitar, but the resonating body of the acoustic guitar does affect the string vibrations and is picked up by the pickup. Piezo-electric pickups often sound thin and bright without processing, while sound hole pickups naturally have a fuller sound.
Does plastic pickup covers affect sound?

One of the first things you might hear is that removing the cover will allow the pickup to sound brighter and more open… In reality, the difference mostly comes from the height of the pickups or screws at the poles. If you adjust both covered and uncovered pickups to the same height, the sound will be almost the same.