How to choose crossover frequency?

10
Chad Berge asked a question: How to choose crossover frequency?
Asked By: Chad Berge
Date created: Wed, Mar 31, 2021 2:37 PM
Date updated: Thu, Sep 8, 2022 3:44 AM

Content

Video answer: How to choose crossover components on a budget

How to choose crossover components on a budget

Top best answers to the question «How to choose crossover frequency»

Setting The Crossover Frequency

  1. Determine your speakers' frequency range…
  2. Set the crossover point around 10 Hz below the lowest frequency your speakers can produce without issue…
  3. Once again, play some music…
  4. Now set the gain of your subwoofer amp to its lowest possible value (a full counterclockwise position).

Video answer: Video 2 - how does changing crossover frequency impact our transient response?

Video 2 - how does changing crossover frequency impact our transient response?

9 other answers

Six Methods to Choose Crossover Frequencies There's more than one viable way to approach many tasks. Explore six methods of deciding crossover settings for your... Each method varies in complexity and the limit is on how much you want to practice and study. Already have the book Crossover Curving: ...

Knowing how to choose the frequencies of the crossovers on a multiband compressor is one of the factors that has the most impact in the final result. In othe...

So the LOWER limit for the Crossover Frequency would be TWICE the bottom end of your regular speakers. If they are rated down to 30 Hz, the Crossover Frequency should be no lower than 60 Hz. If they are rated down to 50 Hz, the Crossover Frequency should be no lower than 100 Hz,

Tips for Setting the Proper Crossover Frequency of a Subwoofer If you know your speaker’s frequency range, set the crossover point roughly 10 Hz above the lowest frequency your... The most common crossover frequency recommended (and the THX standard) is 80 Hz. The numbers below highlight general ...

Here’s how to do it: Find the low-end of the subwoofer’s frequency range either from your user manual or from the manufacturer’s website. Set the crossover point 10 Hz higher than this range for the best result (or go with the recommended 80 Hz). Listen for a smooth transition between your subwoofer ...

Crossover Freq. & Type Notes; Subwoofer: 80 Hz (low pass) Good low-pass frequency range for subwoofer bass & blocking midrange sounds. Best for pure, clear bass sound that "hits." *For THX Certified/non THX Certified 80 Hz is advised, but test 80-120H for the best sound. Tower/main front speakers [4", 5.25", or 6" woofers]

Its best to choose a crossover point using wavelength and common acoustics principles that will apply to your design. Let me explain before you hit the back button… All sound frequencies have a wavelength that can be measured. For example; 2400 Hz has a wavelength of 5.6266 inches. 100 Hz has a wavelength of 135.039 inches or 11.25 feet.

Take 7” of the midrange driver and 4” for the tweeter and add them together which gives you 11”. Divide by two, which is 5.5”. So your minimum distance between drivers is 5.5” from center to center if placed frame to frame. This measurement will dictate a maximum frequency crossover of 2455Hz.

Divide by two, which is 5.5”. So your minimum distance between drivers is 5.5” from center to center if placed frame to frame. This measurement will dictate a maximum frequency crossover of 2455Hz. You may also need to have a small rib of material between the drive units for strength.

Your Answer

Video answer: How to design a crossover board from a schematic

How to design a crossover board from a schematic