Video answer: How to set the crossover on your subwoofer
Top best answers to the question «What does a crossover do for subs»
- Crossover is the frequency where speakers begin to roll off, and the subwoofer starts outputting bass notes and LFEs. Most of today’s systems have an EQ feature that will set up the proper crossover automatically based on the specifications of your speakers.
Video answer: Passive crossover for 4 ohms subwoofer
9 other answers
High-Pass Crossover is the frequency above the low-pass crossover where your speakers will start working and take over from a subwoofer. If you’re using a subwoofer that features a high-pass crossover, it’ll be fixed and will remain the same regardless of your set up. Large speakers are capable of producing full-range audio.
Crossover subs typically provide the connection between drill pipes and collars. They are designed with a box and threads. When joining two threaded components, one end of the crossover sub is designed to match the thread pattern of one of the components to be joined and the other end of the sub is designed to match the thread pattern of the other component.
The crossover frequency of your subwoofer is the frequency at which your speakers start to roll off and your subwoofer kicks in with LFEs and bass notes. Most modern AV receivers feature an auto EQ program that will assign the proper crossover frequency automatically based on the capabilities of your loudspeakers.
The goal is to not accentuate, or bump, the frequencies in the crossover setting location, but arrive at a seamless blend from mains to sub. In addition, we prefer crossover settings below 80Hz whenever possible so that the subwoofer frequencies are not directional. On some satellite systems, you may find that you have to set the crossover to 100Hz.
A crossover is an electrical or electronic component circuit made up of parts that react to certain frequencies and is designed to prevent unwanted ranges of sound from reaching speakers. Crossovers allow a desired range of sound to pass unaltered and effectively block ranges of sound past a limit called the cutoff frequency.
Again, setting the sub's crossover control to the 80-Hz position is a good place to start. If you use a crossover frequency much higher than 80 Hz, deep bass will start to be directional, so you risk hearing the subwoofer as a "source" of sound, which is what you want to avoid.
A crossover is an electronic unit or digital processor which directs different frequencies of an audio signal to different drivers in a loudspeaker system. Music has both high frequencies and low frequencies. A woman’s voice is usually at a higher frequency, for example than a man’s voice.
A crossover is an electronics device that takes a single input signal and creates two or three output signals consisting of separated bands of high-, mid-, and low-range frequencies. The different bands of frequencies feed the different speakers, or “drivers,” in a sound system: tweeters, woofers, and subwoofers.
A crossover SUV (CUV) is a multi-passenger vehicle with car-like unibody construction. Crossovers tend to provide a more comfy ride, better fuel economy and a safer passenger environment. The Gray Area Between SUV and Crossover. There is really no gray area between SUVs vs. crossovers other than people either not knowing the difference or not caring.