What does crossover mean on subwoofer?

Asked By: Wade Doyle

Date created: Sun, Mar 14, 2021 2:02 PM

Date updated: Tue, May 17, 2022 5:26 PM

Content

Video answer: How to set a subwoofer's crossover

Top best answers to the question «What does crossover mean on subwoofer»

Answered by Shayne Bashirian on Thu, Mar 25, 2021 2:58 AM

If the bass is not to your liking, flip the phase either to 0 or 180- listen for quality- and you’re done. Crossover is the frequency where speakers begin to roll off, and the subwoofer starts outputting bass notes and LFEs.

FAQ

Those who are looking for an answer to the question «What does crossover mean on subwoofer?» often ask the following questions:

🏁 What does subwoofer crossover mean?

So now, what’s a subwoofer crossover? Well, it’s the frequency where your subwoofer and speakers work together to cross a higher or lower range. When listening to music, and your system sends out a signal to produce deep sounds, your main speakers will gradually roll off to give way to your subwoofer.

🏁 What does crossover mean on a subwoofer system?

So now, what’s a subwoofer crossover? Well, it’s the frequency where your subwoofer and speakers work together to cross a higher or lower range. When listening to music, and your system sends out a signal to produce deep sounds, your main speakers will gradually roll off to give way to your subwoofer.

🏁 What is crossover subwoofer?

The crossover frequency of your subwoofer is the frequency at which your speakers start to roll off and your subwoofer kicks in with LFEs and bass notes. Most modern AV receivers feature an auto EQ program that will assign the proper crossover frequency automatically based on the capabilities of your loudspeakers.

Video answer: What does a crossover do? different types?

9 other answers

Answered by Arvilla Glover on Sun, Mar 14, 2021 9:20 PM

The subwoofer crossover is a crucial part of setting your speakers to work harmoniously and avoid inconsistencies with the output. Three things can affect the output of your sound system when testing your subwoofer crossover: Overlap of your large, small, and main speakers The volume output of your subwoofer and speakers

Answered by Anastasia VonRueden on Tue, Mar 16, 2021 10:39 PM

Answered by Fae Streich on Wed, Mar 17, 2021 5:58 AM

Ken Creten’s answer is very good so far as it goes, but as he implies things can get quite complicated, and your mileage may vary, as they say. Sounds consists of waves, and like all waves they are described by amplitude (which you hear as loudnes...

Answered by Elizabeth Kerluke on Thu, Mar 18, 2021 5:12 AM

Crossover is the frequency where speakers begin to roll off, and the subwoofer starts outputting bass notes and LFEs. Most of today’s systems have an EQ feature that will set up the proper crossover automatically based on the specifications of your speakers. If your system is using one of these, and you’re not sure how to do it yourself- it’s probably best to leave it alone.

Answered by Yessenia Beatty on Sat, Mar 20, 2021 10:11 PM

A crossover is an electrical or electronic component circuit made up of parts that react to certain frequencies and is designed to prevent unwanted ranges of sound from reaching speakers. Crossovers allow a desired range of sound to pass unaltered and effectively block ranges of sound past a limit called the cutoff frequency.

Answered by Meagan Fadel on Mon, Mar 22, 2021 2:44 PM

Just because THX specified a suggested LFE cutoff frequency, doesn't mean it is always appropriate for all room/speaker implementations or that it must be blindly followed. Many times its easy to forget what a subwoofer is meant to do. It is meant to act like a subwoofer, not a woofer. The purpose of a subwoofer is to reproduce very low frequencies that most loudspeakers cannot reproduce with ...

Answered by Raegan Volkman on Mon, Mar 22, 2021 3:18 PM

A crossover is an electronic unit or digital processor which directs different frequencies of an audio signal to different drivers in a loudspeaker system. Music has both high frequencies and low frequencies. A woman’s voice is usually at a higher frequency, for example than a man’s voice.

Answered by Nikolas Heller on Tue, Mar 23, 2021 11:42 AM

A crossover frequency is the sound frequency that starts the cutoff point for crossover filters. It’s the frequency point at which signals are reduced by 3 decibels (represented as -3dB) A crossover’s outputs are the signal ranges allowed to pass such as high-pass (lower frequencies are blocked) and low-pass (higher frequencies are blocked)

Answered by Alfreda Cummings on Wed, Mar 24, 2021 10:19 PM

Its Subwoofer Crossover test track sweeps a test tone up and down across the Bass frequencies. This test tone goes to just the Front speakers. At the high frequency end of that sweep, the audio will come entirely from those speakers. At the low frequency end it will come entirely from the Subwoofer (due to the Crossover processing). In between, there's a MIX of audio from both the Subwoofer ...

We've handpicked 26 related questions for you, similar to «What does crossover mean on subwoofer?» so you can surely find the answer!

What to set subwoofer crossover to?

What does crossover mean?

crossed over; crossing over; crosses over. Definition of cross over (Entry 3 of 3) intransitive verb. : to reach a broader audience by a change of medium or style a country singer crossing over to the pop charts.

What is a high-pass crossover subwoofer?

If you’re using a subwoofer that features a high-pass crossover, it’ll be fixed and will remain the same regardless of your set up. Large speakers are capable of producing full-range audio. If you have this type of speaker in your setup, you’ll be able to produce sounds as low as 20Hz.

What is frequency for my subwoofer crossover?

For subwoofers: the recommended crossover frequency is 80 Hz (low pass). This a good low-pass frequency that ensures the subwoofer bass is prioritized without including any midrange sounds. It is best for low-end bass. For main speakers: the recommended crossover frequency is 56-60 Hz (high pass).

What is low pass crossover on subwoofer?

Low-Pass Crossover is the frequency where your subwoofers will start working to reach deep notes that aren’t possible for the speakers that we have today. Typically, a low-pass crossover is anywhere from 40Hz and could go up to 60Hz to 100Hz.

Video answer: Rew dual subwoofer crossover - 60, 70, 80 or 90 hz?

What is the best subwoofer crossover frequency?

The most common crossover frequency recommended (and the THX standard) is 80 Hz. The numbers below highlight general guidelines for speaker/subwoofer crossover frequencies On-wall or Tiny 'satellite' speakers: 150-200 Hz. Small center, surround, bookshelf: 100-120 Hz. Mid-size center, surround, bookshelf: 80-100 Hz.

What should subwoofer crossover be set at?

Look at the back of your subwoofer, then set the low-pass crossover at least 10Hz higher than your main speakers’ range. This range is the starting point when configuring your crossover. If your center speaker can produce 80Hz

Video answer: What is a crossover and how does it affect speaker configuration?

How to set crossover subwoofer?

How does a crossover work in a subwoofer?

So the job of the Crossover is to "filter" the audio intended for each speaker so that the Bass frequencies are actually sent to the Subwoofer, and the remaining, higher frequencies go to that speaker. Keep in mind, this has to be done for EACH speaker channel.

When does a subwoofer crossover with a speaker?

It can produce sounds at frequencies lower than your main speakers but higher than your subwoofer. It’s mostly responsible for the transition that happens when your system gets into the crossover. So now, what’s a subwoofer crossover? Well, it’s the frequency where your subwoofer and speakers work together to cross a higher or lower range.

Video answer: What is my crossover doing to my speakers?

What crossover frequency should i use for subwoofer?

Tips for Setting the Proper Crossover Frequency of a Subwoofer If you know your speaker’s frequency range, set the crossover point roughly 10 Hz above the lowest frequency your... The most common crossover frequency recommended (and the THX standard) is 80 Hz.. The numbers below highlight general ...

What crossover should i set for my subwoofer?

What do you set the subwoofer crossover at?

It's hard to settle on a unified crossover frequency for every speaker because a lot of factors come into play when setting one. However, there are common frequency ranges that will work well in many cases. For subwoofers: the recommended crossover frequency is 80 Hz (low pass).

What frequency should i set my subwoofer crossover?

What is a good crossover frequency for subwoofer?

Crossover Freq. & Type Notes; Subwoofer: 80 Hz (low pass) Good low-pass frequency range ...

What is a passive crossover on a subwoofer?

The passive crossovers will then further divide the frequencies between the tweeter and midrange (or tweeter, midrange and woofer in case of a 3-way component set). The subwoofer does not have a supplied passive crossover, use a Low-Pass Filter to block the high frequencies from being sent to the subwoofer.

What is the best crossover setting for subwoofer?

What is the recommended crossover frequency for a subwoofer? For THX Certified and non THX Certified home theater systems, 80 Hz is the recommended setting. However, you can set the crossover (LPF) between 80 Hz - 120 Hz based on which setting sounds best for your system.

What is the crossover frequency for a subwoofer?

Subwoofers need a pure bass signal which you can accomplish by using a low-pass crossover around 70 to 80Hz. Tweeters generally are good for around 3kHz or above, so 3kHz or 3.5kHz cutoff frequencies are usually great choices. How to find the crossover frequency from a speaker crossover

Video answer: What is a crossover? what does lp and hp filter mean?

What is the crossover frequency of a subwoofer?

What is the crossover point on a subwoofer?

Crossover is the frequency where speakers begin to roll off, and the subwoofer starts outputting bass notes and LFEs. Set the crossover point 10 Hz higher than the low end of your speaker's tolerance range. If you don't know the frequency range of your speaker, use a subwoofer matching tool.

What is the subwoofer crossover for each channel?

As an aside, the speaker/subwoofer crossover for each channel is not the same as the 'subwoofer crossover'. It's actually not a subwoofer crossover at all - it's the low pass filter frequency setting for the LFE .1 channel. But it will be shown on the ARC report under the subwoofer section as a separate crossover.

What should crossover frequency be for ls50 subwoofer?

The -3dB frequency is the frequency you want to use when setting your subwoofer crossover – in the case of the LS50 that would be 79Hz. Some will say that you should set the crossover point 10% above that -3dB frequency, but with decent quality components it’s really a matter of taste rather than a hard and fast rule.