What size converter for drag racing?

Allan Senger asked a question: What size converter for drag racing?
Asked By: Allan Senger
Date created: Tue, Apr 27, 2021 3:51 PM
Date updated: Fri, Jun 24, 2022 12:54 AM


Top best answers to the question «What size converter for drag racing»

  • In those cases where the racer is making over 1,000 horsepower, a 9-inch converter would typically be used. Heads-up racers who are making more than 1,000 horsepower will need a specialized converter with exact specifications, usually in the 9-inch to 11-inch range, depending on the application.”


Those who are looking for an answer to the question «What size converter for drag racing?» often ask the following questions:

🏁 What size are drag racing tires?

The best practice is to go with a smaller wheel for performance and as much tire as you can fit to get the most traction possible. On average, you will see the best results with wheels for the front that are in the 15×3.75-inch range or larger, and in the rear a set of wheels in the 15×10-inch range is ideal.

🏁 What size tire for drag racing?

The ET Street tires weigh 26 pounds while the ET Drag tire weigh 27 pounds. Both tires have a 94-inch circumference and a 10.2-inch tread width. First, I made two passes using the pair of ET Drag tires (29.5x10.5x15S). It was a typical hot, high-humidity Mississippi day with a late afternoon temperature of 96 degrees F.

🏁 What size wheels are best for drag racing?

The best practice is to go with a smaller wheel for performance and as much tire as you can fit to get the most traction possible. On average, you will see the best results with wheels for the front that are in the 15×3.75-inch range or larger, and in the rear a set of wheels in the 15×10-inch range is ideal.

10 other answers

Size does matter, even when it comes to torque converters. The size of the torque converter can also be confusing. The smaller that your converter is, the less fluid needed. Less fluid means that there will be a lot less drag on your converter internals, in turn is what lets it stall at a higher speed.

– David Caine, ATI Racing “Getting away from X275, a typical NHRA Stock or Super Stock car will use a converter that is on the small end, typically an 8-inch diameter, because that is all the car requires to transfer power effectively.

Just like a 1,600 to 2,000 HP engine would also use a different core. A torque converter is among the most important parts in drag racing builds, but one of the most misunderstood at the same time. 3. Cam Specs. The aggression or mildness of cam setups are another important aspect of a torque converter.

Drag Racing Torque Converter 8", 1965-90 GM TH 350/400 Small Bolt Pattern (4900-5400 Stall Speed) SKU 254003. $1,091.95. Shop Now. Wish List Compare. Drag Racing Torque Converter 727, Competition 10", Non Lock-up 24 Spline. SKU 143100. $754.95. Shop Now.

The lower amount of fluid you have the less drag that is being created on the internal of the converter, which lets it stall at higher speeds. Thats why 8-10 inch torque converters are rated for racing vehicle applications.

A quick way to approximate the tire diameter is to add the wheel diameter to twice the height of the tire sidewall. For example, a car with 225/40R tires has a sidewall height of 3.54" (225 mm x 40/100 is 90 mm which is 3.54"). If it has 18" wheels then the tire diameter is roughly 25" (18 + 3.54 + 3.54).

8. brake line tubing. 1 stick of 1/4" diameter line with line nuts in a 36" length. 9. brake line tubing. 1 stick of 3/16" diameter line with line nuts in a 36" length. 10. brass 3/16" inverted flare "T" fitting. here's links to some adapter fittings.

Enter Engine Size in Cubic Inches and the Maximum RPM, Then Press 'Enter' Key Theoretical CFM = (Displacement * RPM) / 3456 Street Carb. CFM = ((Displacement * RPM) / 3456) * 0.85 Race Carb. CFM = ((Displacement * RPM) / 3456) * 1.1 Displacement (in 3) Max. RPM

With a stock-type fuel pump and a Turbo 350 transmission, a good converter here would be a 2,000 to 2,200 stall converter.

You have exactly 7 inches between the pre-stage beam and the staged beam. If you allow your car to roll forward exactly 7 inches, breaking the staged beam, the next pair of yellow stage lights on your side of the tree light up and you are now staged. If you stay in that location on the track it is referred to as being “shallow staged.”

Your Answer

We've handpicked 20 related questions for you, similar to «What size converter for drag racing?» so you can surely find the answer!

Why is drag racing called drag racing?

This is only an educated guess, but back in the early part of the 20th century, the main street in any given town was referred to as "the main drag". Since organized drag racing grew from street racing, if you challenged someone to race from one intersection to the next, you are racing on the "main drag", thus "Drag Racing". Now why the street in town was called the "main drag", well, that is another question to be answered elsewhere. Old Skool Racer

What size torque converter do i need go-kart?

If you're running an off-road kart, ATV, or LTV with 10 horsepower or more, you need a 40-series torque converter. These are rated for 8 horsepower minimum and 25 horsepower maximum. The 40-series torque converters have a 1:1 final drive ratio.

What are drag racing cars?
  • Drag Racing Cars. What is Drag Racing? Drag Racing is a contest between two vehicles to determine which can go the fastest from a standing start to full open throttle over an agreed upon distance, which is usually an 1/8 mile, ¼ mile or 1000 feet. While most drag racing now takes place on a professional race track,...
What bump steer drag racing?

What popped up as a problem was the severe bump steer, or that the tire’s toe in changes dramatically as the suspension goes through dive and rebound. This would have caused the steering instability as Blaine went from accelerating (rebound or spring extension) to braking (dive or spring compression).

What helmet for drag racing?

Conquer Snell open face helmet is an elegant and stylish headgear for drag racing drivers. These helmets are the most desirable and cherished in the field of auto racing. Conquer helmets are designed to fulfill the most important need of their users which is mostly concerned about their safety.

What is 405 drag racing?

405 Rc Drag Racing - Home | Facebook. 405 Rc Drag Racing. 1,696 likes · 3 talking about this. Hello everyone I want to welcome you all to the page! This page will be used for drag racing... Jump to.

What is car racing drag?

What are the categories of drag racing?

  • Among the top five professional classes of drag racing are Top Fuel Dragster, Top Fuel Funny Car, Pro Modified, Pro Stock and Pro Stock Bike for motorcycles. There are also popular classifications that fall outside professional races.
What is da drag racing?

Drag racing is an established sport in South Africa, with a number of strips around the country including Tarlton International Raceway and ODI Raceway. Drag racing is controlled by Motorsport South Africa and all drivers are required to hold a valid Motorsport South Africa license.

What is drag racing called?

Drag racing is a type of motor racing in which automobiles or motorcycles (usually specially prepared for the purpose) compete, usually two at a time, to be first to cross a set finish line.

What is drag racing prep?

Drag Strip Prep relates specifically to the preparation of the timed eighth mile to quarter mile surface, most commonly at a drag strip. Mass Traction provides drag strip prep services along with onsite and international virtual consulting.

What is drag racing tree?

Likewise, people ask, what does it mean to tree someone in drag racing? Definition: A solo run with no competitor in the other lane. Lingo: Christmas tree. You could also say: 'Tree. Definition: The starting line light fixture that lets racers know when the car is properly positioned for a start and when to start.

What is illegal drag racing?

Drag racing illegaly.

What is jr drag racing?
  • Drag Racing League competitors race are called Jr. Dragsters and are half-scale versions of Top Fuel dragsters. Using a five-horsepower, single-cylinder engine, a Jr. Dragster can go as fast as 85 mph and as quick as 7.90 seconds in an eighth-mile, though younger age groups are restricted to slower times/speeds.
What is mud drag racing?
  • Mud Drags (also known as mud racing, mud running and mud bogging) is an exciting (and messy) form of off-road motorsport popular throughout North America and growing in popularity in other countries. The goal of a mud drag is to drive a vehicle through a pit of mud as far and as fast as you can.
What is nostalgia drag racing?

Nostalgia drag racing is a form of drag racing using cars from the 1950s, 1960s and lately the 1970s. The cars raced are a mixture between restored originals, while others are re-creations of older cars.

What is street drag racing?

Street Drag. A standard race between any two street-legal vehicles, often with slicks prohibited, mandating DOT-spec tires, on the drag strip. Street Drift. Street drifting is a driving technique where the driver intentionally oversteers, with loss of traction, while maintaining control and driving the car through the entirety of a corner. The technique causes the rear slip angle to exceed the front slip angle to such an extent that often the front wheels are pointing in the opposite ...

What is tnt drag racing?

TNT Drag - The Next Talent Talent, is a Brazilian drag competition premiered on July 7th, 2020, on YouTube. The contestants were selected to compete for the title of " The Next Talent Drag ". The series airs on YouTube hosted by Desirée Beck and is fully recorded online.

What oil weight drag racing?

What kind of oil do you use in drag racing?

  • For a really demanding application such as Top Fuel drag racing, a heavy straight weight oil (usually 70) is required because of the extreme loads on the bearings and the fuel blowby that ends up in the crankcase. And the oil is usually so diluted after each run that it usually has to be changed. How often should racing oil be changed?
What states have drag racing?

Tennessee and Texas have the most with 11 each. California, North Carolina and Ohio each have 10; Florida and South Carolina have nine; Georgia and Kentucky have eight; Alabama, Illinois, Michigan, New York, and Pennsylvania have six; Colorado, Indiana, Maryland, Missouri, and Oregon have five; Hawaii, Kansas, Virginia ...

Why is car drag racing called drag racing?

Right after the war, in the mid-to-late 1940s, when hot rods were first becoming popular and informal street races were happening all over America, the term “drag racing” as a synonym for ...